News
Machines built, installed and commissioned, applications and updates from R-Tech, Indore.

Shearing blades: get them wrong and you pay on every leaf
A shearing blade decides your burr, your deburring cost and your blade cost per leaf. Clearance set to the thickness, tooling, guides, the press and the blade steel all decide it. Here is what goes wrong, and how R-Tech shearing gets it right.
Read More →
Shearing automation: plan every flat before the blade comes down
Flats reach the shear in lengths that vary, and the shearing pattern decides how much of the steel becomes offcut. R-Tech shearing automation measures each flat, decides its pattern of leaf lengths to reduce scrap and positions every cut by servo, as part of a complete SPVC cell from the bundle table to sorted, punched leaves.
Read More →
Inside a leaf spring plant: the six process cells
A leaf spring plant is six process cells, from cutting the flats to testing the finished spring. Each cell hands its result to the next, and what one cell gets wrong, the next cannot put right. R-Tech builds quality machines for every cell.
Read More →
Why scale must come off before parabolic rolling
A parabolic leaf is rolled to a designed thickness profile and works hard along its whole length. Scale left on it in the roll gap is rolled into that profile, marks the surface and wears the rollers. Descale immediately before rolling.
Read More →
Protect the fatigue life of your spring: a descaler is a quality machine
Scale rolled into a leaf spring costs it accuracy, surface quality, peening effectiveness and fatigue life. An R-Tech descaler takes the scale off before forming, and delivers high-pressure water only during the descaling cycle.
Read More →Send us your component drawing and required output. We will propose the machine.
Discuss Your Requirement →